Ricky Shannon Latest Blog Articles Page 1

    3D Printing, Stratasys, PolyJet Technology

    A Closer Look at the Origin One 3D Printer

    May 10, 2021

    For the last 15 years Stratasys and their value-added resellers, like TriMech, had to field one reoccurring question that divided our 3D printing world into two clearly different segments. That question was, “Can I have the material performance of FDM, with the surface finish of PolyJet right out of the printer?" For so long, that answer was “no” unless you did some post-processing of the prints. Even looking into the history of Stratasys in the years before the Objet and Stratasys merger, you were mainly on one side or the other – strength or surface finish. However, this all changed with the advent of Programmable Photopolymerization (P3) technology, which is now found in the Stratasys Origin One 3D printer, and finally, we can say “yes”...

    3D Printing, Stratasys, Industry News

    Stratasys Expands Their Technology Offering and Why You Should Care

    May 5, 2021

    If you have kept your ear to the ground on the 3D printing front, you were bound to have heard the rumblings that Stratasys was planning to launch several new technologies this year. That rumbling turned into full quake at Stratasys’s Manufacturing Event, at the end of April, where they introduced three new platforms – effectively doubling Stratasys’s 3D printing technology offering.

    Regardless if you were seeing feeds on social media or attending the virtual launch event, the impact of this announcement will be felt across the 3D printing industry. I wanted to take a few minutes to help you understand the significance of these new technologies, as this announcement is a major leap forward in TriMech’s polymer-based 3D printing portfolio. We will review these new offerings, why they matter, and who they matter to.

    Tech Tips, Video Tech Tips for 3D Printing

    Creating Manufacturing Notes Within GrabCAD Print

    April 16, 2021

    Communication is an area we can all work on, even in the 3D printing space. But never fear, GrabCAD Print has a little-used tool to help annotate and mark up parts for both file setup and secondary operations. This tool is rightfully called Manufacturing Notes and it does exactly as its name implies – allows for the dictation of valuable information on the part being printed within GrabCAD Print.

    3D Printing, GrabCAD Print, Video Tech Tips for 3D Printing

    How GrabCAD Shop Can Positively Impact Your Business

    March 11, 2021

    On average, 15% of the time in your 3D print lab is wasted on order management. Yes, you heard that right, 6 out of every 40 operating hours in the work week gets devoted to tracking down orders, managing files, and communicating with file creators. That is over seven weeks a year where productive time is not being devoted to part production. This isn’t the fault of the hardworking individuals in your print lab. It is the result of the available production management software tools not being tailored to the needs of 3D printing labs…..until now.

    3D Printing, Stratasys, 3D Printing Materials

    Machinable Metals vs 3D Printed Polymers

    February 23, 2021

    As an Application Engineer with TriMech, my role often takes me into many manufacturing environments ranging from mom-and-pop machine shops to aerospace manufactures. As different as you may think these facilities would be, we often find a common trend – most custom fixtures, jigs, equipment, and assembly tools are made from aluminum. The biggest reason when asked about this is because “it's what we have always used,” and “it's what the toolroom prefers to work with.” When probed further we usually hear “aluminum is more than strong enough,” so it is chosen for a task that nowhere near approaches aluminum’s tensile strength benefits. There is a wide variety of materials out there other than aluminum that may fit some of these needs better. In this article we’re going to take a look at how printed polymers stack up against it.

    Tech Tips, Video Tech Tips for 3D Printing

    Opening the Latest SOLIDWORKS Files in GrabCAD Print

    February 19, 2021

    If you you've been asking yourself, “What gives? Why can’t I open SOLIDWORKS files in GrabCAD Print anymore?" You are not alone. I know the struggle. I may have even said a few expletives over it. This is not due to GrabCAD Print dropping SOLIDWORKS compatibility. It is the result of GrabCAD Print’s development team needing to take some time to verify that the latest version of SOLIDWORKS files is compatible with all the features that GrabCAD Print has to offer. Let's take a look at some details.

    SOLIDWORKS, 3D Printing, Stratasys, GrabCAD Print, Video Tech Tips for 3D Printing

    Moving Hi-Res Graphics in SOLIDWORKS to GrabCAD Print for 3D Printing

    January 8, 2021

    Frequently, when producing parts to print on full-color PolyJet 3D printers (like the J55 and J850), we have the need to place logos and icons on our models. When using more traditional means of applying pixel-based graphics or decals on parts can have unpredictable outcomes when exporting for 3D printing. Often, we find it difficult to properly set the resolution of the logo to match the part, which results in logos that have blurry or pixelated edges. In this 3D Printing Video Tech Tip, we talk about how to create sharp-edged logos and icons using SOLIDWORKS.

    3D Printing, PolyJet Technology, FDM Technology, GrabCAD Print

    Top 10 Features I Am Thankful For In GrabCAD Print

    November 24, 2020

    Having spent a great deal of my time over the last decade working in various design, CAD, CAM and additive manufacturing software tools, I am always grateful for features that save time and improve the ability to get to my desired outcome. With the year coming to an end, there is no better time than now to reflect and present the top 10 features I am thankful for in GrabCAD Print.

    3D Printing, GrabCAD Print, Video Tech Tips for 3D Printing

    Changing Hole Sizes in GrabCAD Print

    November 3, 2020

    You thought GrabCAD print was just for assigning your print parameters, didn’t you? Well, it is so much more. Buried under that sleek, easy-on-the-eyes interface is a very powerful piece of software. GrabCAD Print doesn’t just help you assign part attributes, it can also alter part geometry.

    After receiving some questions from customers about a recent Video Tech Tip I produced that involved installing heat-set inserts into a part, I wanted to dive more into adjusting hole sizes for hardware like inserts or even thru bolts. In the following video, I will show you how to change the diameter of a hole directly within the GrabCAD Print environment.